Based on the reliable ystral drive X50/10, a special Jetstream mixing head for the mixing of suspensions and emulsion is offered.

The Jetstream mixing head creates a flow of the liquid directed from the surface of the liquid downwards to the bottom of the vessel - immediately after switching on, the whole liquid is in movement the corners of the vessel are seized as well.
Due to the beam directed down-wards, even heavy sediments are seized and homogeneously distri-buted in the liquid.

Low viscosity liquids are quickly and completely homogenised and/or suspended.

As the Jetstream mixing principle does not apply any shear force, the characteristic of the product does not change.

Technical data

Drive X50/10
Three phases motor 3x 400 V
50 Hz, 550 Watt, 3.000 min-1
Via the integrated frequency converter and the
built-in potentiometer, the speed may be set from
300-6.000 min-1 / (10 - 100 Hz).
Protection class IP 55

Shaft Y-MD
Immersion depth 380 mm
without seal(s) in the submersed part

Mixing head
Jetstream mixing head consisting of rotor and stator,
Diameter of the head 64/78 mm

Stand U1
Stationary single column stand
Length of the column 1.000 mm
Stainless steel 1.4301 (AISI306L)

Clamp SKL1

Control elements
With a combined ON/OFF and „Emergency OFF“ switch built into a PVC housing